Due to incorrect settings for connecting to the provider (WAN)

 Most often, this problem is encountered during the first configuration of the router . I wrote about this in an article: when setting up a router, it writes "No Internet access", or "Limited" and there is no Internet connection .


Everything is very simple here. The router must be configured strictly to work with a specific (own) provider. In the settings of the router, in the section "Internet", "WAN", etc. (depending on the model), you must select the type of connection (Static IP, Dynamic IP, PPPoE, PPTP, L2TP) and set all the parameters that are issued by the provider. Only then will the router be able to establish a connection with the provider and access the Internet. Read more in the article: what type of connection to specify when configuring the router .

Computer networks are the basis of communication in IT. They are used in a huge variety of ways and can include many different types of network.

Important: we check all the parameters for connection with our Internet provider!

Also, do not forget to check if your ISP uses MAC address binding . If it does, then you need to register the MAC address of the router with the provider, or clone the address from the computer to which the Internet was originally bound.

Comments

Popular posts from this blog

Test of English as a Foreign Language (TOEFL)

Targeted by DDoS attacks

What Is a DDoS Attack?